330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications – Stick – 2.15 m (7.054 ft)

Illustration 1 g02539636

(2) Bucket cylinder group

(3) Stick cylinder group

(4) Bucket linkage group

(5) Bucket group

(6) Boom group

Note: All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bucket, and the cylinder pin bores.

Table 1
Specification for 236-8406 , and 236-8396 Hoe Stick Gp    
Item     Qty     Part     Specification Description    
1     –     –     Assemble the stick cylinder so that the grease zerk is directed, as shown.    
7     2     166-1498 Lip Type Seal     Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
8     2     148-3386 Pin As     Diameter is
89.850 ± 0.025 mm (3.5374 ± 0.0010 inch).    
9     2     Install the following bushings (9) , (12) and (13) in the bore so that the part number of each bushing is facing outward.
Bushing is one of the following part numbers:    
236-8561 Bushing Inside diameter is
120.20 ± 0.02 mm (4.732 ± 0.010 inch).
Installation depth is
9.5 ± 0.8 mm (0.37 ± 0.03 inch).
228-5621 Bushing Inside diameter is
120.32 ± 0.04 mm (4.737 ± 0.002 inch).
Installation depth is
9.5 ± 0.8 mm (0.37 ± 0.03 inch).
10     2     166-1494 Lip Type Seal     Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
11     2     9X-4598 Lip Type Seal     Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
12     2     4I-6897 Bushing     Inside diameter is
80.25 ± 0.02 mm (3.159 ± 0.010 inch).    
Installation depth is
9.5 ± 0.8 mm (0.37 ± 0.03 inch).
13     2     228-5619 Bushing     Inside diameter is
110.30 ± 0.04 mm (4.343 ± 0.002 inch).    
Installation depth is
9.5 ± 0.8 mm (0.37 ± 0.03 inch).