330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications – Stick – 2.80 m (9.186 ft)

Illustration 1 g02643557
Table 1
Specification for 290-9281 Hoe Stick Gp    
Item     Qty     Part     Specification Description    
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the attachment, and the cylinder pin bores.    
1     –     –     Assemble the stick cylinder so that the grease zerk is directed, as shown.    
2     2     166-1498 Lip Type Seal     Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seals so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
3     1     5I-3299 Pin As     Diameter is
79.850 ± 0.025 mm (3.1437 ± 0.0010 inch).    
4     1     113-2963 Pin As     Diameter is
89.850 ± 0.025 mm (3.5374 ± 0.0010 inch).    
5     Install the bushings (5) in the bore so that the part number of the bushing is facing outward.
Bushing is one of the following part numbers:    
2 236-8561 Bushing     Inside diameter before assembly is
120.20 ± 0.02 mm (4.732 ± 0.001 inch).
Installation depth is
9.5 ± 0.8 mm (0.37 ± 0.03 inch).    
2 228-5621 Bushing     Inside diameter before assembly is
120.32 ± 0.04 mm (4.737 ± 0.002 inch).
Installation depth is
9.5 ± 0.8 mm (0.37 ± 0.03 inch).    
6     2     235-7679 Lip Type Seal     Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seals so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
7     2     166-1496 Lip Type Seal     Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seals so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
8     2     241-7231 Bushing     Install the bushings (8) in the bore so that the part number of the bushing is facing outward.
Inside diameter before assembly is
70.17 ± 0.04 mm (2.763 ± 0.002 inch).
Installation depth is
9.5 ± 0.8 mm (0.37 ± 0.03 inch).    
9     2     228-5617 Bushing     Install the bushings (9) in the bore so that the part number of the bushing is facing outward.
Inside diameter before assembly is
100.29 ± 0.04 mm (3.948 ± 0.002 inch).
Installation depth is
9.5 ± 0.8 mm (0.37 ± 0.03 inch).