330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications – Stick – 3.20 m (10.5 ft)

Illustration 1 g03410408
Table 1
Specification for 422-7066 Hoe Stick Gp    
Item     Qty     Part     Specification Description    
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bucket, and cylinder pin bores.    
1     –     –     Assemble the stick cylinder so that the grease zerk is directed, as shown.    
2     2     166-1498 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
3     1     5I-3299 Pin As     Diameter is
79.850 ± 0.025 mm (3.1437 ± 0.0010 inch).    
4     1     113-2963 Pin As     Diameter is
89.850 ± 0.025 mm (3.5374 ± 0.0010 inch).    
5     2     Bushing is one of the following part numbers:    
236-8561 Bushing (11) Inside diameter is
120.20 ± 0.02 mm (4.732 ± 0.010 inch).
Installation depth is
9.5 ± 0.8 mm (0.37 ± 0.03 inch).
228-5621 Bushing Inside diameter is
120.32 ± 0.04 mm (4.737 ± 0.002 inch).
Installation depth is
9.5 ± 0.8 mm (0.37 ± 0.03 inch).
6     2     235-7679 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
7     2     166-1496 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
8     2     241-7231 Bushing (11)     Inside diameter is
70.17 ± 0.04 mm (2.763 ± 0.002 inch).    
Installation depth is
9.5 ± 0.8 mm (0.37 ± 0.03 inch).
9     2     228-5617 Bushing (11)     Inside diameter is
100.29 ± 0.04 mm (3.948 ± 0.002 inch).    
Installation depth is
9.5 ± 0.8 mm (0.37 ± 0.03 inch).
( 11 ) Install the bushing in the bore so that the part number of each bushing is facing outward