|
|
|
|
|
|
| Illustration 1 | g02945556 |
| Specification for 375-1722 Stick Cylinder Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 290-9183 Bushing | Bore before assembly is 90.25 ± 0.04 mm (3.553 ± 0.002 inch). Installation depth in the cap assembly is 9.85 ± 0.30 mm (0.388 ± 0.012 inch). Installation depth in the rod assembly is 10.0 ± 0.5 mm (0.40± 0.02 inch). |
| 2 | 1 | 7Y-4956 Locknut | Before assembly, lubricate the threads all around with 309-6932 Hydraulic Oil. |
| Torque to 15500 ± 800 N·m (11432 ± 590 lb ft). |
|||
| 3 | 2 | 191-5604 Ring | Lubricate the inside diameter and the outside diameter with clean grease. |
| 4 | 1 | 9X-3607 Seal As | Lubricate the inside diameter and the outside diameter with clean grease. |
| 5 | 1 | 191-5605 Ring | Lubricate the inside diameter and the outside diameter with clean grease. |
| A | 1 | 357-4704 Cylinder As | Bore is 170.050 ± 0.025 mm (6.6949 ± 0.0010 inch). |
| B | 1 | 357-4713 Rod As | Diameter is 114.930 ± 0.038 mm (4.5248 ± 0.0015 inch). |
| C | 1 | 375-1723 Head | Bore over two lands are 115.63 ± 0.03 mm (4.552 ± 0.001 inch). |
| 6 | 1 | 359-7192 Stop | Free linear movement of the stop after assembly is 0.50 ± 0.26 mm (0.020 ± 0.010 inch). |
| 7 | 2 | 095-0930 Retaining Ring | Maximum outside diameter after assembly is 81 mm (3.2 inch). |
| 8 | 1 | 231-6843 Seal Ring | The slit of the seal ring must turn in the direction of the piston. |
| 9 | 1 | 191-5644 Bushing | Outside diameter before assembly is 120.148 ± 0.032 mm (4.7302 ± 0.0013 inch). |
| Thickness is 2.475 ± 0.025 mm (0.0974 ± 0.0010 inch). |
|||
| 10 | 1 | 324-9484 Buffer Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 11 | 1 | 324-9486 U-Cup Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 12 | 1 | 191-5648 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
| 13 | – | – | Before assembly, apply green Loctite 609 to the wiper seal groove. |