|Specification for 148-4644 Swing Drive Gp and 199-4701 Swing Drive Gp|
|1||–||–||Apply 4C-5599 Anti-Seize Compound to the inside diameter, outside diameter of the roller bearing and to the surfaces of the mating parts.|
|2||1||6V-7238 Shutoff Valve||Torque to 28 to 31 N·m (248 to 274 lb in).|
|When the valve shutting off, tighten to
2.9 ± 0.5 N·m (25.7 ± 4.4 lb in).
|B||–||–||After installation, make the stake marks near the opening of each spring pin hole.|
|Distance from the edge of the spring pin hole to the stake mark is
2.25 ± 0.75 mm (0.089 ± 0.030 inch).
|3||2||199-4561 Lip Type Seal||Lubricate the sealing lip lightly with the lubricant that is being sealed. Lubricate the circumference of lip type seals with grease when the seal is installed in the cage.|