|
|
|
|
|
|
| Illustration 1 | g00684315 |
|
Monitor Panel (1) Fuel gauge (2) Engine coolant temperature gauge (3) Action lamp (4) Engine speed dial indicator (5) Hydraulic oil temperature gauge (6) Message center |
|
|
|
|
|
|
|
| Illustration 2 | g00685772 |
|
Monitor Panel (7) “Up” key (8) “Left” key (9) “Right” key (10) “Down” key (11) “Cancel” key (12) “Setting” key (13) “Menu” key (14) “OK” key |
|
The information from the controller is displayed on the monitor. The following service programs and functions are available from the controller:
- The controller informs the monitor about the condition of the machine. Some examples are listed: hydraulic oil temperature, engine coolant temperature and fuel level.
- The controller informs the monitor about any existing and/or past failures of the electronic control system.
- Various settings of the controller are performed.
- Adjustment and testing of the electronic control system are performed.
Start-Up Of The Service Mode
|
|
|
|
|
|
| Illustration 3 | g00685772 |
|
Monitor Panel (7) “Up” key (8) “Left” key (9) “Right” key (10) “Down” key (11) “Cancel” key (12) “Setting” key (13) “Menu” key (14) “OK” key |
|
The keys of the keypad are used to enter the service mode. The keys are used to change the modes. Next, the appropriate key is pressed until the desired mode is displayed on the message center.
“Up” key and “Down” key
The “up” key (7) is used and the “down” key (10) is used to scroll up and down through the items in the message area.
“Left” key and “Right” key
The “left” key (8) is used and the “right” key (9) is used to scroll to the left and to the right through the items in the message area.
“Setting” key
The “setting” key (12) is used to set the menu that is being displayed in the message area.
“Menu” key
The “menu” key (13) is used to access the main menu.
“Cancel” key
The “cancel” key (11) is used to cancel the immediate selection and the key is used to exit the menu screen. The screen of normal operation will be displayed when the “cancel” key is pressed during the menu screen.
“OK” key
The “OK” key (14) is used to select the item that is being highlighted in the message area.
Start-Up Of The Service Mode
|
|
|
|
|
|
| Illustration 4 | g00687262 |
The above screen should be displayed. Then, press the “menu” key (13).
|
|
|
|
|
|
| Illustration 5 | g00687282 |
The “down” key should be pressed. Highlight the “PREFERENCES” setting. Press the “OK” key.
|
|
|
|
|
|
| Illustration 6 | g00764425 |
The above screen should be displayed.
|
|
|
|
|
|
| Illustration 7 | g00687296 |
|
|
|
|
|
|
| Illustration 8 | g00687300 |
The keys for direction are used to input the password. Input the password and press the “OK” key.
|
|
|
|
|
|
| Illustration 9 | g00776428 |
|
Typical example of a display |
|
The above screen should be displayed if the correct password is entered.
|
|
|
|
|
|
| Illustration 10 | g00687326 |
The above screen should be displayed if the password that was entered is not correct.