1. Home
  2. CAT
  3. Track

Cat Undercarriage Management Guide Page 16

Management Guide
PEGP5027-04 www.cat.com Printed in USA © 2006 Caterpillar All Rights Reserved
Expect More from the Experts
Maximize the Life of Your Undercarriage
Undercarriage maintenance costs can consume 50 percent
or more of the maintenance budget for your Cat track-type machines.
It’s good management to understand how your undercarriage works so
you can reduce wear and minimize operation and maintenance costs.
• Maintain optimum track tension
• Run the right shoe width for conditions
• Monitor operator habits
• Prepare machines for underfoot conditions
These procedures, combined with Custom Track Service (CTS)
from your Cat Dealer, can extend the life of your undercarriage
and cut downtime.
Caterpillar.The difference counts.
™
Cat Dealers define world-class
product support. We offer you the
right parts and service solutions,
when and where you need them.
The Cat Dealer network of highly
trained experts keeps your entire
fleet up and running to maximize
your equipment investment.
When you buy a Cat
undercarriage system, you get
the support of our parts and
service representatives who
have tools to help you manage
your undercarriage system.
Custom Track Service (CTS)
is the best way to control costs
and downtime.
While there is no substitute
for CTS, you play an equally
important role in managing
your undercarriage system.
Understanding how your
undercarriage works and wears
is critical. With correct operation
and maintenance you can reduce
wear and save money. Together
we form a working relationship
to lower costs.
CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Previous page
Next page

Contents Summary of Cat Undercarriage Management Guide

  • Page 1Cat Undercarriage ® Management Guide Caterpillar. The difference counts.™ Undercarriage System Management • Operating and Maintenance Tips • Track Adjustment Procedures • Hardware Requirements
  • Page 2Contents Introduction.............................................................................................................................3 Operating and Maintenance Tips ........................................................................................4-7 Custom Track Service Factors
  • Page 3Introduction Work it hard. Make it last. Fix it right. Caterpillar® Undercarriage is designed to work and wear as a system to reduce your operating costs. You make daily decisions that impact undercarriage wear and costs. This guide can help you and your operators understand how undercarriage works
  • Page 4Operating and Maintenance Tips Custom Track Service Factors Affecting Wear Your undercarriage is an expensive While there is no substitute for Application investment. It accounts for as much Custom Track Service, you also play Application describes what your as 20 percent of the price of a new an im
  • Page 5Packing Terrain During operation, materials can Most of the time you can’t control the Working on a side hill shifts the stick to and pack between mating terrain you are working in. However, weight and load balance to the components such as rollers, links, it is important to understand how downhill
  • Page 6Operating and Maintenance Tips Factors Affecting Wear Control the operation of your machine One of the best ways to protect your machine against unnecessary wear is to make sure it is used properly. All of the following cause additional wear on the components of your Always use the narrowest shoe po
  • Page 7Be sure your track is always properly adjusted Operating Checklist Every application affects Improperly adjusted track can result undercarriage wear differently and in problems and wear on other requires proper track adjustment. components such as: Adjust your track in the underfoot ❏ 1. Always use
  • Page 8Track Adjustment Procedures Elevated Sprocket Tractors Incorrectly adjusted track can cost 1. Move the tractor forward and let it 1 you money both in accelerated coast to a stop without applying the undercarriage wear and downtime. brakes. Make sure slack is between If the track is too tight, damagi
  • Page 9Chart 1 Chart 3 Proper Track Sag Track Roller Frame Extension Specifications Machines without carrier rollers Machines with and without carrier rollers Max. Length of Inches Millimeters Exposed Tube Model Min Target Max Min Target Max Model (Serial Number Range) Inches Millimeters D11R, D11N, D10 6.
  • Page 10Track Adjustment Procedures Low Sprocket Tractors and Loaders 1. Move the machine forward and let On machines with more than one 1 it coast to a stop without applying the carrier roller per side, mark the track brakes. Then park the machine and roller frame .5 inch or 13 millimeters turn off the eng
  • Page 11Hydrostatic Loaders 1. Move the machine forward and let 5. Open the relief valve and let the 1 it slowly come to a stop. Then park idler drift back until the second mark the machine and turn off the engine. is behind the recoil housing. Then Place a tight line over the grouser close the relief valve
  • Page 12Track Adjustment Procedures Hydraulic Excavators 1. Operate the machine in the direction 4. If the track is too tight, loosen it by 1 of the idlers. opening the relief valve and allowing 2. Stop with one track pin directly over grease to escape. the front carrier roller. Park the 5. Tighten track by
  • Page 13Hardware Requirements Track Roller and Idler Caps Inadequate clamping of the track roller 3. Snug both bolts evenly prior to and idler caps can result in broken torquing. retaining bolts and damage to the 4. Tighten the bolts to the specified frame or bogie bore. torque shown in the charts below. To
  • Page 14Hardware Requirements Shoe and Link Split Master Link The number one cause of shoe 3. Tighten the bolts to the specified The importance of correctly loosening is improperly tightened shoe initial torque shown in the chart below. assembling and torquing cannot hardware. In general, track hardware 4.
  • Page 15Notes 15
  • Page 16Expect More from the Experts When you buy a Cat undercarriage system, you get the support of our parts and service representatives who have tools to help you manage your undercarriage system. Custom Track Service (CTS) is the best way to control costs and downtime. While there is no substitute for C