Disassembly Procedure Start By: Remove the control manifold. Refer to Disassembly and Assembly, “Control Manifold (Pilot Oil) – Remove”. Note: Cleanliness is an important factor.…

Removal Procedure Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug…

Illustration 1 g00858046 (1) Torque for eight hose assemblies … 108 ± 10 N·m (80 ± 7 lb ft) (2) Blend corners of cutting edges…

Illustration 1 g00856459 (1) Torque for two hose assemblies … 108 ± 10 N·m (80 ± 7 lb ft) (2) Blend corners of the cutting…

Illustration 1 g00858032 (1) Torque for two hose assemblies … 76 ± 4 N·m (55 ± 3 lb ft)

Illustration 1 g00858021 Illustration 2 g00858024 (1) Torque for one hose assembly … 150 ± 15 N·m (110 ± 11 lb ft) (2) Torque for…

Illustration 1 g00858010 (1) Torque for one hose assembly … 76 ± 4 N·m (55 ± 3 lb ft) (2) Torque for one elbow assembly…

Illustration 1 g01450975 (B) Distance from the centerline of the mounting pin to the support assembly … 250.0 ± 5.0 mm (9.84 ± 0.20 inch)…

Illustration 1 g00857245 (1) Torque for three hose assemblies … 76 ± 4 N·m (55 ± 3 lb ft) (2) Two 140-0727 Relief Valves Rated…

Illustration 1 g00857278 (1) Torque for four hose assemblies … 76 ± 4 N·m (55 ± 3 lb ft) (2) Blend corners of cutting edges…