Illustration 1 g00857906 (1) Torque the locknut with lubricant on threads. … 1800 ± 90 N·m (1320 ± 65 lb ft) (2) Before installing the…
Tag: hydraulic
Illustration 1 g00857581 (1) Torque of locknut with lubricant on threads … 3600 ± 190 N·m (2660 ± 140 lb ft) (2) Before you install…
Illustration 1 g01450949 (1) Torque for two bolts … 50 ± 10 N·m (37 ± 7 lb ft) (2) Torque for two bolts … 39…
Illustration 1 g00857426 (1) Torque for two hose assemblies … 80 ± 7 N·m (60 ± 5 lb ft) (2) Torque for eight bolts ……
Installation Procedure NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product.…
Removal Procedure Start By: Remove the refrigerant condenser. Refer to Disassembly and Assembly, “Refrigerant Condenser – Remove” for the proper procedure. Personal injury can result…
Removal Procedure NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product.…
Illustration 1 g00290709 Nitrogen gas pressure … 1770 ± 200 kPa (255 ± 29 psi) (1) Torque for cap … 2.9 ± 0.2 N·m (26…
Procedure for Releasing the System Pressure Release the hydraulic system pressure before any hydraulic lines or components are disconnected or removed. Start the engine and…
Illustration 1 g00858128 Relief valve locations (A) Main relief valve (B) Boom cylinder line (rod end) (C) Boom cylinder line (head end) (D) Stick cylinder…