Specification Note: Certain machines will default to “Economy Mode” at machine startup. Change to “High Hydraulic Power Mode” before performing the test procedure. Table 1…
Tag: 320C
Specification Note: Certain machines will default to “Economy Mode” at machine startup. Change to “High Hydraulic Power Mode” before performing the test procedure. Table 1…
Table 1 Required Tools Part Number Description Qty 9U-7400 Multitach Tool Group 1…
Illustration 1 g02540180 Table 1 Specification for 206-3305 Pilot Valve Gp Item Qty Part Specification Description …
Illustration 1 g01413064 Note: Apply 4C-9506 Retaining Compound to the nut. (1) Torque for nut … 69 ± 5 N·m (50 ± 4 lb ft)…
Illustration 1 g00767069 (Section A-A) Boom regeneration valve (Section B-B) Stick unloading valve and stick regeneration valve (Section C-C) Line relief valve for the negative…
Illustration 1 g00677986 (1) Torque for plug … 35 ± 4 N·m (26 ± 3 lb ft) (2) Torque for two plugs … 10 ±…
Illustration 1 g00757913 (1) 5I-8511 Spring Free length … 61.4 mm (2.42 inch) Outside diameter … 13.2 mm (0.52 inch) (2) Connector Torque for Connector…
The operational checks can be used to find leakage in the system and components that are not functioning correctly. The speed of rod movement or…
The overload warning device is a system that warns the operator that the pump pressure for the boom cylinder lines has exceeded a set value.…