Specification Table 1 “Machine Drift on a Slope – Check”     Drift mm (inch)     New     Rebuild     Service Limit…

Note: When the procedure for the Travel Test On Level Ground cannot be performed, this test may be used as a substitute. Note: The engine…

Note: The engine speed and/or the machine configuration that is used during this test can affect the results of this test. Refer to Testing and…

The operational checks can be used to find leakage in the system and components that are not functioning correctly. The speed of rod movement or…

When the main pumps have been serviced or the hydraulic oil has been replaced, remove the air from the hydraulic system. Remove the air from…

The release of hydraulic pressure in a hydraulic circuit is required before service is performed to that hydraulic circuit. Release the pressure in the following…

A visual inspection of the system is the first step in order to troubleshoot a problem. Shut off the engine and lower all implements to…

Hydraulic oil pressure can remain in the hydraulic systems after the engine and pump have been stopped. Serious injury can be caused if this pressure…

Hydraulic Tank Illustration 1 g00865854 (1) Return line (2) Air breather (3) Relief valve (4) Return chamber (5) Filter (6) Tank chamber (7) Suction filter…

Hydraulic Schematic For Return Circuit Illustration 1 g00755670 Hydraulic schematic for return circuit (1) Travel motor (2) Swing motor (3) Blade control valve (4) Drain…