Illustration 1 g00742510 (E) Determine dimension (E) by measuring from the mating surface of the housing to the end face of the inner race of…

Illustration 1 g00858035 (1) Torque for twenty bolts … 270 ± 40 N·m (200 ± 30 lb ft) (2) Clean surfaces of protective coating prior…

Installation Procedure Illustration 1 g00915839 Position the boom cylinder. Install pin assembly (4) . Install bolt (3). Illustration 2 g00915840 Install pin (6) . Install…

Removal Procedure Start By: Release the hydraulic pressure. Refer to Disassembly and Assembly, “Hydraulic Pressure – Release”. Personal injury can result from hydraulic oil pressure…

Installation Procedure NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product.…

Removal Procedure Table 1 Required Tools     Tool     Part Number     Part Description     Qty     A    …

Installation Procedure NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product.…

Removal Procedure At operating temperature, the hydraulic oil is hot and under pressure. Hot oils can cause burns. To prevent possible personal injury, release the…

Installation Procedure NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product.…

Removal Procedure Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine…