Communication Problem Between Controller And Monitor ( 312C And 315C) Illustration 1 g00777861 Diagram for 312C and 315C Communication Problem Between Controller And Monitor (…
The Engine Controller Is Abnormal Note: The 590-12 will be set on the engine controller. The code will be set when a fault code exists…
No Power Supply To Controller For 312C, 315C, and 318C Illustration 1 g00777475 Diagram for 312C, 315C, and 318C No Power Supply To Controller for…
Illustration 1 g00691925 Controller At The Rear Of The Cab (1) Green LED (2) Yellow LED (3) Red LED (4) Controller Table 1 Normal Indications…
Table 1 Component Identification (CID) CID No. Name Of Component 91 (Not in 321C) Throttle position signal…
Illustration 1 g00280782 Connections for the Electronic Technician (ET) The components that are needed to use CAT Electronic Technician to determine diagnostic codes are listed…
Electronic Control System The monitor and the controller are the main components of the electronic control system. The monitor and the controller have a self-diagnostic…
The logged event mode will log a condition of the machine that is out of the normal range without the failure of a component. This…
The logged error mode allows a person to view a logged diagnostic code or an error code that was cleared previously. Illustration 1 g00688124 Enter…
The active error mode will be displayed on the monitor panel. The active error codes correspond to an abnormal condition that is detected by the…