The logged error mode allows a person to view a logged diagnostic code or an error code that was cleared previously. Illustration 1 g00688124 Enter…

The active error mode will be displayed on the monitor panel. The active error codes correspond to an abnormal condition that is detected by the…

The configuration mode will display information about the machine and changes in various values. Illustration 1 g00770916 Enter the service mode. Select the “CONFIGURATION” option…

The status mode will display the parameters of the components of the machine. Illustration 1 g00687617 Enter the service mode. Select “STATUS” from the menu…

The switch status mode is used to display the “ON” status or “OFF” status of various switches in the machine. Illustration 1 g00687441 Enter the…

The ECM summary mode is used to display the software that is installed on the machine. Perform the following procedure in order to access this…

Adjustment Of The Clock Illustration 1 g00687262 At the above menu screen, press the “menu” key. Illustration 2 g00687282 Select the “PREFERENCES” option. Press the…

Illustration 1 g00684315 Monitor Panel (1) Fuel gauge (2) Engine coolant temperature gauge (3) Action lamp (4) Engine speed dial indicator (5) Hydraulic oil temperature…

The colors and the sizes of the wires that are shown in the Electric Circuit Diagram are identified and described in the following chart: Table…

The following references should be used to locate the components and connectors for the machine that is being serviced: Electrical System Schematic, Parts Manual and…